Related Images
RE-2005
Smoke Series RE-2005
Reveco® Smoke series consists of a range of modern colors with excellent consistency that only requires minimum maintenance. The Stone guarantees all of its properties: antibecterial, repairable, non porous, scretch-resistant and water resistant. They achieve an authentic stone appearence with the convenience of polymers. Warm and rich, this translucent material is easier to work with than natural stone or marble thus opening up new possibilities.
Reveco® is a material which combines the durability of stone with the workability of hardwood. Following sections describe the most important elements.
Cutting
Reveco® is harder than wood. Straight cuts are made with a circular saw with carbide-tipped or diamond-tipped teeth. Curved cuts are made with manual routers or with numerically controlled routers (CNC), depending on the number of identical pieces that need to be cut. Rounded inside corners are routed in order to prevent cracking. Router bits must have tungsten carbide tips.
Joining
To minimise material and facilitate installation, corner joints should be made 45 degree (mitre) rather than butt. The edges to be joined should be straight, smooth and clean. Joints should only be made with " Reveco® Joint Adhesive” mitre joints with a router equipped with a V groove carbide bit. Joints will be very visible due to natural product pattern so consideration must be given to joint positioning, When used as a cladding surfaces rear of sheets requires white backing Product is designed to resemble natural materials; variance in colour & pattern should be expected.
Finishing
Finishing Reveco® is a critical part of the end consumer’s perception of your ability to fabricate Reveco®.Under normal circumstances, begin by sanding the joints with 120 grit paper. Finish with a 320 grit paper, followed by 1200 to reach a recommended semi-gloss level.
MATTE FINISH
Basic Care
Most countertops have a matte finish. For this finish, rub the stain with an abrasive cleanser and Green Scotch-Brite® pad with water. Always rub in a circular motion. Rinse and towel dry. Rubbing the entire surface occasionally will maintain the finish.
Scratch Removal
Hand sand the cut or scratch using 220 grit paper, sanding in a circular motion. Follow by using a 320 or 400 grit paper, again in a circular motion.
High Gloss Finish
Basic Care
If the counter has a polished or high-gloss finish (not recommended for countertops or other high-use or high traffic areas) non-abrasive cleanser applied with a sponge or use a white polishing compound rubbed with a soft cloth.
Scratch Removal
Note:
Sand the area with 1500 or 2000 grit paper. always sanding in a circular motion. Buff the area with a white polishing compound using a low-speed polisher equipped with a wool pad. If desired, a non-abrasive countertop polish may be applied.
PRICE EFFECTIVE
Reveco® is a pocket friendly product range, especially in comparison to Original Onyx / Alabaster stone and marble. Reveco® is not a natural material, so it can be produced in large numbers resulting to economy of production which is later on passed to the consumer itself.
EASY FABRICATION
Skilled carpenters, tile setters, and glaziers can easily install Reveco® material using basic carpentry tools.
VARIOUS COLORS & DESIGNS
More options available in terms of colours and designs as compared to natural stone and marble. Also Specific colour can be manufactured according to customer requirement.
NON-POROUS
Being a nonporous material, it does not allow stains to make their way deep into the surface which make it a stain resistant, easy to clean product.
SCRATCH RESISTANT
Unlike other solid surfaces it can easily be renewed and repaired if scratched or chipped. if scratches comes after years it can renewed to new surface by buffing.
WATER RESISTANT
No harm with warm and cold water